Which Jewellery Products Should You Advertise

Most jewellery ad accounts in India are set up the same way. One catalogue, every product switched on, and an algorithm left to decide where the money goes. The algorithm does exactly what it is told: it chases revenue. In jewellery, revenue is a poor guide to profit. A ₹1.4 lakh plain gold chain can leave you with less money after the ad than a ₹28,000 pair of diamond studs.

This guide gives you a repeatable way to decide which pieces deserve ad money, which deserve a different job, and which should stay out of your campaigns. It is written for Indian D2C and omnichannel jewellery brands heading into the busiest stretch of the year: Dhanteras on 6 November 2026, then the wedding season that restarts on 20 November.

The short answer: advertise the pieces that pass three tests at the same time. They earn enough rupees per order to pay for the ad (margin). You can ship enough of them in the sizes and karats people actually order (stock). Buyers already show they want them (appeal). Score each test from 0 to 3 and multiply the scores instead of adding them. A zero anywhere means the piece should not get acquisition budget, however good the other two numbers look.

Key takeaways

  • Bestsellers are not automatically the right products to advertise. Many sell without ads, and in gold-heavy categories they often carry the thinnest margins.
  • Measure margin in rupees per order against what an ad-driven purchase costs you, not as a percentage.
  • Measure stock as weeks of cover in the variants buyers actually order, not as total units.
  • Measure appeal from behaviour (add-to-cart rate, saves, enquiries, returns), not from opinion.
  • Multiply the three scores. Addition hides fatal weaknesses, such as a stunning piece with only two units left.
  • Every product lands in one of eight archetypes, and each archetype has a different job: scale it, test it, protect it, use it to open the door, use it to book appointments, clear it quietly, or exclude it.
  • Re-score weekly, and straight away whenever the gold rate moves by about 3% or more.

Why “Just Advertise Your Bestsellers” Breaks Down

Three shifts this year make product choice matter more than budget size.

Fewer pieces are being bought, at higher values

The World Gold Council’s Q3 2026 report shows India’s jewellery demand fell 20% by volume to 99.9 tonnes in July to September 2026, while its value rose 16% to ₹1,48,700 crore. Total gold demand dropped 29% to 162.5 tonnes, which the council linked to high prices, the higher import duty and the Prime Minister’s appeal to curb gold buying. It expects buyers to adapt through lighter jewellery and exchange-led purchases, and puts full-year demand at 625 to 675 tonnes.

Fewer transactions means every slot in your catalogue ads competes for a smaller pool of buyers. Spend that goes behind the wrong piece is harder to win back.

Margin moves with the gold rate

The effective import duty on gold and silver rose from 6% to 15% on 13 May 2026. Prices have swung hard since. Bajaj Broking’s daily table put 24K gold at about ₹1,55,840 per 10 grams on 18 September 2026. By 2 November, it was about ₹1,38,970, and silver had fallen nearly 20% in a month to around ₹1,82,010 per kg.

When metal is most of a product’s price, both its selling price and its margin move every day. A product ranking you built in September may be wrong by Diwali.

The mix is moving toward studded, lighter and lower-carat pieces

Titan’s Q2 FY27 business update showed studded jewellery growing in the early 30s per cent, against roughly 20% for plain gold, with CaratLane up about 32%. Buyer numbers grew only in the mid single digits while average ticket size rose by double digits. The government also added 9 karat gold to BIS hallmarking in July 2025, opening a cheaper, certified price point.

The categories growing fastest are the ones where margin lives in design and stones rather than metal. Those are usually the pieces with room to pay for advertising.

Why the algorithm will not sort this out for you

Performance Max, Shopping campaigns and Meta’s Advantage+ catalog ads optimise toward the conversion value you report. If you report revenue, a rupee from a 22K chain looks identical to a rupee from a diamond pendant. Google Ads can only show gross profit by product if you add a cost of goods sold value to your Merchant Center feed and report conversions with cart data. Most jewellery accounts do neither.

Founders feel this. In one Shopify Community thread, a merchant with about 800 products asks how to filter the catalogue by profit margin before launching a first ad campaign. The usual advice in threads like that, “start with your bestsellers”, is half right. It covers appeal and ignores margin and stock.

Before You Score Anything: The Readiness Gate

A product should not enter your scoring sheet until its page can handle paid traffic. Paying to send buyers to a page that cannot answer their questions is the most expensive mistake in this guide.

Check each piece against this list:

  • Karat, net weight in grams, and stone details sit near the price.
  • The price breakdown shows metal value, making charges, stone value, and GST.
  • The page states the BIS hallmark and HUID, and gives certificate numbers for diamonds.
  • Lab-grown stones are labelled “laboratory-grown diamond” everywhere, including ad copy and feed titles. Under BIS standard IS 19469:2025, the word “diamond” on its own now refers only to natural diamonds.
  • Exchange, return, and buyback terms are written in plain numbers.
  • At least one image or video shows the piece on real skin, so the buyer can judge size.
  • The price in your product feed matches the page after every gold reprice.

If a piece fails, fix the page first. Our guide on increasing jewellery website conversion rate covers each element in detail.

Factor 1: Margin, Measured in Rupees per Order

Where the margin sits in a piece of jewellery

In most retail categories, margin is spread across the whole product. In gold jewellery, much of the selling price is metal that you buy and sell at close to the market rate. Your margin sits in making charges, stones, design, and brand.

A useful way to think about this is metal share: the part of a product’s price that is metal value at today’s rate. The higher the metal share, the thinner the margin and the more the price swings with gold.

Public data backs this up. A Redseer report cited in BlueStone’s June 2025 investor presentation puts typical gross margins at:

  • 5% to 15% for wedding jewellery (mostly 22K, 30 to 250 grams);
  • 25% to 35% for 18K or 14K daily wear;
  • 30% to 40% for other occasion-led jewellery, which carries more stones, silver, and platinum.

Making charges commonly run from about 5% to 10% on plain machine-made designs, up to 25% or 30% for intricate handcrafted work.

Here is how that plays out across a typical catalogue. Treat it as indicative, and replace it with your own costs.

Product typeMetal shareTypical margin profileWhat to watch
Gold coins and barsVery highMaking charge of roughly 1% to 3%, almost nothing left after costsPrice moves daily; rarely pays for an ad
Plain 22K chains, bangles, kadasHighThin, mostly the making chargeMargin shrinks when gold falls if making is a percentage
22K bridal setsHighLow, 5% to 15% grossHuge ticket, long decision, mostly bought in person
18K and 14K diamond daily wearMedium25% to 35% grossUsually the best acquisition products
Studded occasion wear, coloured stonesLower30% to 40% grossHigher tickets need more trust content
Lab-grown diamond piecesLow to mediumOften wide on paperStone prices are still adjusting; re-check monthly
SilverLow ticketHigh percentage, small rupeesShipping, packaging, and returns eat a bigger share

On lab-grown diamonds specifically, wholesale prices have roughly halved. Because wholesale has fallen faster than retail, gross margins have widened on paper (same StartupTalky report). The risk is that falling retail prices erode the price point you are advertising, so lab-grown margins deserve a monthly check.

The test: ad headroom

The question is not “is this product profitable?” It is “can this product pay for the ad that sells it?” Two numbers answer that.

Contribution per order = selling price after GST, minus product cost, shipping and insurance, payment fees and packaging, minus the expected cost of returns and failed deliveries.

Ad headroom = contribution per order divided by your expected ad cost per purchase for that price band.

Use your own last 60 days of data for expected cost per purchase. If you have none, use a cautious estimate and treat the product as a test.

Ad headroomMargin scoreWhat it means
2.0 or more3The order pays for the ad with room to spare
1.3 to 2.02Workable, if costs stay stable
1.0 to 1.31Thin; one bad week wipes out the profit
Below 1.00Every ad-driven order loses money before any repeat purchase

Why rupees beat percentages

Take two products from the same brand:

  • A ₹2,400 silver jhumka keeps over half its post-GST price as contribution, about ₹1,250.
  • A ₹28,000 pair of 14K diamond studs keeps only about a quarter, roughly ₹6,800.

If a purchase costs ₹1,100 in ads for the jhumka and ₹3,200 for the studs, the jhumka’s headroom is 1.1, and the studs’ is 2.1. The lower-percentage product has nearly twice the room to absorb advertising.

Returns belong in this sum. Jewellery return rates in India commonly run around 10% to 18%. Cash-on-delivery orders fail at roughly 25% to 30%, against 2% to 3% for prepaid ones. A product that sells mostly on COD should carry that cost in its contribution number.

Re-score margin when gold moves

If your making charge is a percentage of metal value, it shrinks in rupees when gold falls. A flat per-gram charge does not. Re-score gold-heavy products whenever the 22K rate moves about 3% either way.

Also expect ad costs to climb in peak weeks. One Indian benchmark report puts paid social CPMs 25% to 50% above the annual average in October to December. Use peak-week cost per purchase when you score for the festive season.

For the full maths on break-even ROAS by jewellery category, see our guide to fixing your jewellery ad budget before you raise it.

Factor 2: Stock, Measured as Ad-Ready Depth

Why total units mislead

Fifty units of a ring sounds like plenty, until you find most of them sit in sizes few buyers order, or in a karat or metal colour that sells slowly. Jewellery stock is uneven in ways most products are not:

  • Ring and bangle sizes, karat options and metal colours split one design into many variants.
  • Made-to-order pieces depend on workshop capacity and lead time, not shelf stock.
  • One-of-one and limited pieces cannot absorb any meaningful ad spend.
  • Omnichannel brands often hold stock in stores that the website cannot dispatch quickly.

The test: weeks of cover

Ad-ready units = units you can dispatch within your promised delivery time, in the variants that make up most of that product’s orders. For made-to-order pieces, count the production capacity you can deliver within your stated lead time.

Weeks of cover = ad-ready units divided by the weekly orders you expect once ads run. Estimate those orders from your planned budget divided by expected cost per purchase, plus your current organic sales.

Weeks of coverStock score
4 weeks or more3
2 to 4 weeks2
1 to 2 weeks1
Under 1 week, a one-of-one piece, or a lead time longer than you promise0

Two stock traps that cost jewellery brands money

Sold-out variants keep spending: Meta and Google keep serving a product until your feed tells them it is unavailable.

  • Mark sold-out variants as out of stock the moment they sell out.
  • Filter your catalogue product sets to in-stock items.
  • On Meta, consider internal labels for flags that change often. Meta’s catalog documentation says internal labels can be updated as often as needed without sending items through policy review. Editing custom labels can trigger that review.

Advertising slow movers to clear them: It feels efficient, but a piece usually sits because buyers do not want it at that price, not because they have not seen it. Paid acquisition rarely fixes that. Existing-customer channels do it more cheaply: WhatsApp broadcasts, email, an exchange scheme, a bundle with a hero piece, or a store display.

Factor 3: Buyer Appeal, Measured From Behaviour

Founders often pick ad products by taste. Buyers vote with clicks, saves, carts, and returns. These signals, roughly in order of reliability, tell you what they think:

SignalWhere to find itWhat good looks like
Product page view to add-to-cart rateGA4 e-commerce item report or your store analyticsAbove your catalogue median for the same price band
Organic sales velocityOrders with no paid touchSteady sales without ads behind them
Saves, shares and DMs on posts featuring the pieceInstagram insightsSaves above your account median; saves signal intent more than likes do
WhatsApp and call enquiries by productLabels in WhatsApp Business, CRM tagsRepeated enquiries for the same piece
Search demand for the item typeSearch Console queries, Google Keyword PlannerRising or at a seasonal peak
Returns and failed deliveriesOrder management system, courier reportsAt or below your category average
Three-second legibilityWatch the ad on a phone, at feed speedThe reason to want it is obvious in the first frame

That last signal matters more in jewellery than most people expect. A delicate pendant whose detail disappears on a phone screen will struggle in feed ads, however beautiful it looks in hand. Scale on skin, sparkle in motion, and a clear price band in the opening frame do much of the work.

Scoring appeal

  • 3: top quarter of your catalogue for add-to-cart rate within its price band, with returns at or below average.
  • 2: above the median.
  • 1: below the median, or untested.
  • 0: bottom quarter, or returns well above average.

Always compare within price bands. A ₹2,000 piece will always collect more add-to-carts than a ₹50,000 one. That says nothing about which is more wanted by its own buyer.

New designs with no data start at 1: Before spending on ads, show the piece to people who already know you, through email, WhatsApp, or Instagram Stories. The team at Foreplay also recommends this step before committing inventory and ad spend. Then give it a ring-fenced test budget for 7 to 10 days with three or four genuinely different creative angles, and re-score.

Appeal changes with the calendar.

  • Coins and light gold peak around Dhanteras.
  • Light studded pieces and gifts rise when wedding guests start shopping.
  • Self-purchase and gifting take over when weddings pause.

Score appeal for the season you are about to advertise in, not the one just gone.

Putting It Together: The MSA Score

MSA Score = Margin score × Stock score × Appeal score. Each factor runs from 0 to 3, so the maximum is 27.

Why multiply instead of add

Picture a handcrafted polki choker with excellent margin, enormous Instagram saves, and two pieces in stock. Added together, it scores 3 + 0 + 3 = 6 out of 9 and looks like a strong candidate. Multiplied, it scores 0.

That is the right answer for acquisition ads: you cannot scale spend on two pieces, however desirable they are. Multiplication lets any single fatal weakness veto the product, which is how jewellery economics actually behave.

What each score band means

MSA ScoreBandWhat to do
18 or 27ScaleProspecting budget, most of your new creative, more freedom on ROAS targets
8 to 12Run with guardrailsCapped budgets, retargeting-led, fix the weakest factor before scaling
4 or 6Specific role onlyRetargeting, bundles, email and WhatsApp, organic content
0 to 3No acquisition budget for online checkoutFollow the archetype below to give it a different job

Because each factor runs from 0 to 3, the only possible scores are 0, 1, 2, 3, 4, 6, 8, 9, 12, 18 and 27. The bands above cover every case.

The Eight Jewellery Ad Archetypes

Treat a factor score of 2 or 3 as high and 0 or 1 as low. Every product then falls into one of eight groups, and each has a clear job.

ArchetypeMarginStockAppealTypical exampleIts job in your marketing
HeroHighHighHigh14K diamond everyday studs in core sizesLead prospecting, get the newest creative, scale in steps
Hidden GemHighHighLowA well-made designer ring that photographs poorlyFix the creative or page first, then test with a capped budget
Scarce StarHighLowHighA limited handcrafted polki or kundan collectionWaitlist, pre-orders, retargeting and consultations; reorder before scaling
Door OpenerLowHighHighGold coins, plain 22K chains, lightweight festive earringsWin first purchases only under strict cost caps, or drive store visits; measure new buyers
Appointment PieceLowLowHighHeavy 22K bridal sets made to orderOptimise for video consultations and store visits, not online checkout
Clearance CandidateLowHighLowLast season’s designs with deep stockKeep off acquisition; use existing customers, exchange offers and bundles
Quiet PieceHighLowLowA niche design with a few units leftLeave it on the site and out of campaigns
Dead WeightLowLowLowDiscontinued, slow, low-margin stockExclude everywhere; review for remake or melt

A few notes on the groups that cause the most confusion.

Door Openers are where festive budgets go to disappear: Coins and plain gold are what many people want at Dhanteras, so they collect clicks and revenue. They rarely leave enough margin to pay for a cold-audience ad. If you advertise them:

  • aim to win a first purchase from someone likely to come back;
  • cap the cost per purchase hard;
  • judge the campaign on new buyers and their second purchase, not on ROAS.

Your existing customers can usually be reached for free on WhatsApp and email.

Appointment Pieces are not a lost cause; they just need a different objective. A bridal family spending several lakh rupees rarely checks out online, and UPI limits make it impractical anyway. Run these as click-to-WhatsApp, video consultation, or store visit campaigns, and measure bookings. Store-led brands should pair this with a strong Google Business Profile; our guide on jewellery store visibility on Google Maps explains how.

Hidden Gems are the cheapest heroes to create. The margin and stock are already there. What is missing is a reason to want the piece in the first three seconds. New photography, a styling angle for a specific occasion, or a 3D render that shows the setting clearly can move appeal from 1 to 2. That moves the MSA score from 9 to 18. Our comparison of 3D jewellery renders vs photography covers when each works.

Worked Example: Scoring an Eight-SKU Catalogue

This example is illustrative, built on plausible costs at early November 2026 prices. It is not a client result. Use your own numbers.

A mid-sized omnichannel brand scores eight products ahead of the wedding season.

ProductPriceContribution per orderExpected ad cost per purchaseHeadroomMWeeks of coverSAppeal evidenceAMSAArchetype and action
14K diamond studs₹28,000₹6,800₹3,2002.1346 units ÷ 9 a week = 5.13Add-to-cart 1.6x median, returns 6%327Hero: scale
18K lab-grown solitaire pendant₹42,000₹12,600₹5,0002.5318 units ÷ 6 a week = 3.02Add-to-cart 1.3x median, returns 9%212Guardrails: raise ready stock
14K rose gold bracelet₹36,000₹9,000₹4,0002.25314 units ÷ 6 a week = 2.32Add-to-cart 1.1x median, returns 8%212Guardrails: reorder core sizes
18K cocktail ring₹54,000₹15,500₹6,0002.6340 units ÷ 4 a week = 103Add-to-cart 0.7x median, one creative tested19Hidden Gem: new creative test
Oxidised silver jhumka₹2,400₹1,250₹1,1001.11120 units ÷ 25 a week = 4.83Add-to-cart 1.4x median, returns 12%39Guardrails: only with bundles or proven repeat
2g 24K gold coin₹28,900₹550₹2,6000.20Over 20 weeks3Strong Dhanteras demand30Door Opener: existing customers and store only
Handcrafted polki choker₹1,85,000₹38,000₹14,0002.732 pieces0Saves 4x account median30Scarce Star: waitlist and consultations
22K bridal necklace set, 60g₹8,80,000₹60,000Not viable for online checkoutBelow 10Made to order, 5-week lead0Many enquiries30Appointment Piece: book consultations

What the sheet tells this brand

One true hero: The diamond studs earn the largest share of prospecting budget and the newest creative concepts every week.

Four products run with guardrails, each for a different reason.

  • Lab-grown pendant and bracelet: held back by stock. The fix is a reorder of core sizes before the 21 to 26 November wedding cluster.
  • Cocktail ring: held back by appeal. It gets a small, time-boxed creative test: an on-hand video at true scale, styled for wedding guests.
  • Silver jhumka: held back by thin headroom. It only runs where an add-on or bundle lifts the order value, or where the brand can show silver buyers come back.

Three zeros that still have work to do.

  • Coin: goes to WhatsApp and email for existing customers, plus the store, not into cold prospecting.
  • Polki choker: gets a waitlist, retargeting of people who viewed it, and a consultation call to action.
  • Bridal set: runs as an appointment campaign measured on bookings.

What addition would have done: Adding scores would have ranked the coin and the polki choker at 6 out of 9, level with products that can actually scale. In a festive week, both would have soaked up budget: the coin because it attracts cheap clicks and revenue, the choker because it attracts saves and admiration.

Heroes are made, not just found

The scoring sheet is also a to-do list.

You can raise a score on each factor:

  • Margin: a prepaid incentive (such as a small making-charge discount) cuts failed COD deliveries; bundles lift order value; offering a design in 14K as well as 18K can widen headroom.
  • Stock: reorder the sizes and karats that make up most orders, and agree on faster lead times with your karigars for proven designs.
  • Appeal: new creative angles, real-skin video, clearer price breakdowns and customer content. Our guide on encouraging customers to share unboxing videos shows how to collect that content at scale.

How to Make Google and Meta Follow Your Scores

A scoring sheet only helps if the platforms can see it. Push the scores into your product feeds so campaigns spend where you decided.

Google Merchant Center and Google Ads

Merchant Center gives each product up to five custom labels, custom_label_0 to custom_label_4. You can use them to filter products in Performance Max, Shopping, and Demand Gen campaigns (Google Merchant Center Help).

Shoppers never see them. One practical setup:

LabelUse it forExample values
custom_label_0MSA bandscale, guardrail, role, exclude
custom_label_1Archetypehero, hidden_gem, scarce_star, door_opener
custom_label_2Margin tierm3, m2, m1, m0
custom_label_3Seasondhanteras, wedding, gifting, evergreen
custom_label_4Price bandunder_10k, 10k_35k, 35k_75k, over_75k

Then build separate campaigns or listing groups by band:

  • Let the scale band run on a more relaxed ROAS target.
  • Hold guardrail products to stricter targets or capped budgets.
  • Keep the exclude band out of prospecting entirely.

Add the cost_of_goods_sold attribute to your feed and report conversions with cart data. Google Ads then reports gross profit by product, so you can check whether your scores hold up in real sales.

Keep feed prices in step with gold repricing, because mismatched prices get products disapproved. The ad budget guide linked above covers that feed-lag problem in detail.

Meta catalogue ads

Build product sets from the same labels:

  • A Scale set for Advantage+ prospecting.
  • A Scale plus Guardrail set for retargeting.
  • A Scarce Star set for retargeting only.
  • Exclude the zero band and anything out of stock.

Use internal labels for values that change weekly, such as the MSA band, and custom labels for stable attributes such as metal or category.

Creative should follow the scores too. Heroes need a steady supply of new concepts. Our guides on using Reels to increase jewellery conversions and jewellery photoshoot ideas for every funnel stage help you keep that pipeline full. For how Meta and Google should divide the work, see Google Shopping vs Meta Ads for jewellery.

WhatsApp, email and the store

Door Openers, Clearance Candidates and Scarce Stars do most of their selling here. These channels reach people who already trust you, without paying an auction price for every impression.

Re-Scoring: When the Answer Changes

Scores go stale quickly in jewellery. Re-score every product weekly, and your top 50 products daily during peak weeks.

Re-score at once when:

  • the 22K gold rate moves about 3% or more in either direction;
  • a product drops below two weeks of cover;
  • returns or failed deliveries spike on a product;
  • a new creative lifts a product’s add-to-cart rate.

The calendar for the next three months

WindowDatesWho is buyingPieces that usually gain appealWatch out for
Dhanteras and Diwali6 to 8 November 2026Metal buyers, festive giftingCoins, light gold, silverDoor Openers soaking up budget at peak CPMs
Weddings restartFrom Dev Uthani Ekadashi on 20 November; main clusters around 21 to 26 November, 2 to 6 December and 11 to 12 DecemberBridal families, wedding guestsBridal (by appointment), light studded pieces, giftsThin stock in core sizes
Kharmas pauseMid December to mid JanuarySelf-purchase, Christmas and New Year giftingDaily wear, lab-grown pieces, silver giftsWedding creative running past its season
Valentine’s run-upLate January to 14 February 2027Couples, self-giftingPendants, rings, lab-grown solitairesLate reorders on hero sizes

Dates for Dhanteras and Diwali come from published panchang listings. Wedding muhurat dates vary by region and community, so check local panchangs for your key markets.

Seven Mistakes We See When Brands Pick Products for Ads

  1. Leaving “All products” switched on. The algorithm spreads budget toward revenue, which in jewellery often means low-margin, high-ticket gold.
  2. Reading margin as a percentage. A 55% margin on a ₹2,400 piece can leave less room for advertising than a 25% margin on a ₹28,000 piece.
  3. Scaling one-of-ones or pieces with one size left. Ads find buyers you cannot serve, and they leave disappointed.
  4. Using ads to clear aged stock. Slow movers usually have an appeal problem. Existing-customer channels clear them more cheaply.
  5. Judging appeal by likes or the founder’s favourite. Saves, add-to-cart rate and returns are far better guides.
  6. Never re-scoring when gold moves. A ranking from September can be wrong by November.
  7. Skipping compliance. Calling a lab-grown stone a “diamond” in ad copy or feed titles, or missing hallmark and HUID details on the page, risks complaints and wasted spend. It also undercuts the trust your ads are trying to build.

When This Framework Is the Wrong Tool

Be honest about where it fits.

  • Brand-new stores with under 60 days of data cannot score appeal reliably. Run a structured test across 10 to 20 products first, then score.
  • Store-led brands will understate the value of some products because online contribution ignores store sales that ads influenced. Add store visits or uploaded offline sales before you judge a product.
  • Brands with proven repeat buyers can score margin on lifetime contribution instead of first-order contribution. Do this only if you have measured repeat rates by cohort, not assumed them.
  • Very small catalogues of under 15 products may not need a scoring sheet at all. Test everything and let results decide.
  • Fast-deflating categories, such as some lab-grown lines, need margin re-checked every month.

How Kyros Solution Helps Jewellery Brands Choose What to Advertise

Kyros Solution is a digital marketing agency headquartered in Surat that works only with D2C jewellery and lifestyle brands. We are a Shopify Partner and have worked with more than 120 brands. The framework in this guide reflects how we approach catalogue work before recommending any spend. Our post on how we analyse a jewellery brand before starting work describes that process in full.

What that looks like in practice:

  • A product-level profit audit: We work out contribution per order, weeks of cover, and appeal signals for your catalogue, and hand you a live scoring sheet.
  • Feeds and campaigns that follow the scores: Our performance marketing team sets up custom labels, cost of goods sold, cart data, and catalogue product sets, so Google and Meta spend where your margin is.
  • Pages that can take paid traffic: Our web development and CRO and UI/UX teams fix the readiness gate: price breakdowns, HUID details, feed price sync, and checkout.
  • Heroes that also rank: Our SEO services build collection and product page content around your hero products, so they earn organic visibility in Google and AI answers instead of relying on ads alone.

When we are not the right fit:

  • You cannot share product costs or backend sales data. Without them, any product ranking is guesswork.
  • Most of your products lose money on every order after product, shipping, and return costs. Fix pricing or product mix first.
  • You want a guaranteed ROAS. Nobody controls auction prices or the gold rate.
  • You have fewer than 15 products and a small budget. This guide and a spreadsheet will take you most of the way on your own.

If you would like a second opinion on which of your pieces should carry your wedding-season budget, talk to our jewellery marketing team.

FAQs

Should you advertise your bestsellers or your highest-margin jewellery?
Neither on its own. Advertise products that combine enough rupee margin per order to pay for the ad, enough stock in the variants people buy, and proven buyer demand. Bestsellers often sell without ads and may carry thin margins, while high-margin pieces may lack stock or appeal. Score all three factors and multiply them.

What margin does a jewellery product need before you advertise it?
Think in rupees, not percentages. Divide the contribution left after product, shipping, payment, packaging, and return costs by what an ad-driven purchase costs you in that price band. Below 1.0, every ad-driven order loses money. Around 2.0 or more gives comfortable room.

How do gold price changes affect which products you should advertise?
When gold moves, both the price and the margin of metal-heavy products move with it. Percentage-based making charges shrink in rupees when gold falls. Re-score gold-heavy products whenever the 22K rate shifts by about 3%, and keep your feed prices in step with your site.

Should you run ads for gold coins on Dhanteras?
Usually not to cold audiences. Coins carry very small making charges, so an ad-driven sale rarely covers its cost. Promote them to existing customers through WhatsApp and email, drive store visits, or run tightly capped campaigns aimed only at winning first-time buyers you can bring back.

Can you advertise bridal jewellery online profitably?
Rarely for direct online checkout, because margins are thin and buyers prefer to see heavy pieces in person. Bridal works better as an appointment product: click-to-WhatsApp, video consultations and store visits, measured by bookings rather than online ROAS.

How much stock should you have before advertising a jewellery product?
Aim for at least four weeks of cover in the sizes and karats that make up most of the product’s orders, based on the weekly sales you expect once ads run. Two to four weeks is workable with guardrails. Under a week, or a one-of-one piece, should not get acquisition budget.

How do you measure buyer appeal for a new design with no sales yet?
Show it to your existing audience first through Instagram Stories, WhatsApp, or email, and watch saves, replies, and clicks. Then run a short, capped test of 7 to 10 days with three or four distinct creative angles. Compare its add-to-cart rate with products in the same price band before scaling.

Are lab-grown diamond pieces good products to advertise?
Often, because their margins tend to be wider than gold-heavy pieces. There are two cautions. Retail prices are still adjusting, so re-check margins monthly. And BIS rules require the stones to be described as laboratory-grown, not simply as diamonds, in every ad, feed title, and product page.

How do you tell Google and Meta which products to prioritise?
Add your scores to the product feed. In Google Merchant Center, use custom labels to split products into campaigns or listing groups by score band, and add cost of goods sold for profit reporting. On Meta, build catalogue product sets from those labels, using internal labels for values that change often.

How often should you re-score your products?
Weekly as a baseline, and daily for your top products during peak weeks such as Dhanteras and the main wedding dates. Re-score immediately after a big gold price move, a stock drop below two weeks of cover, or a jump in returns.

Tags: No tags found

Helping Jewellery and Lifestyle brands scale digitally with insight-led marketing strategies, premium creative design, and high-converting websites.

Subscribe Our Newsletter

    © 2026 Kyros Solution. All Rights Reserved.